A heavier duty version of our gate system for our Freestanding Fencing. Heavy-duty gates use both hinge and latch posts in the same way the freestanding system uses posts. It features a stabilizing header and heavy-duty hinges/latch. The tubing is made from 35mm diameter powder-coated black metal posts. 83% thicker tubing than the light-duty gate, the heavy-duty frame gate is designed for more regular use. Designed to be much more durable over time.
The heavy-duty frame gate kit relies on the use of one of the post assemblies from your freestanding system installation for either the latch or hinge side of the gate. The main image above shows this assembly in gray. So this gate kit comes with one additional post to complete the gate, not two. This gate must be installed with one of your freestanding system posts serving as one of the sides. If this does not work for your gate location, you will need to contact us to add an additional post assembly to your order.
The height of our heavy-duty gate is approximately 182cm (6 Feet). This is designed to be used with our Freestanding Fencing System at is the maximum standard finished height of 218cm (7 Feet) tall. If your finished height is planned to be less than 7 feet, then the heavy-duty gate may need to have its height adjusted by trimming the vertical tubing components on-site during installation.
An additional post is included with the Heavy Duty gate but not an additional spring-loaded arm since it is not required.
*** One of the gates pictured features spring-loaded arms mounted on either side. This is not mandatory and most installations will not require this unless the gate rests on a corner or where the fence changes directions***